ZiLOG ZENETSC0100ZACG Manual de usuario descargar pdf (Pagina 3)

Ethernet Smart Cable

User Manual

UM020705-1012 Page 3 of 13

Connecting the Ethernet Smart Cable to a DHCP-Based

Network

The following considerations must be determined prior to connecting the Ethernet Smart

Cable to a DHCP-based network:

• An active Ethernet connection must be available, such as from an Ethernet hub

• A standard CAT-5 Ethernet cable must be available

Observe the following steps to connect the Ethernet Smart Cable:

1. Connect the Ethernet Smart Cable to an Ethernet connection.

2. Connect the 5 V DC power supply to the Ethernet Smart Cable power connector. As a

result, the green PWR and RUN LEDs will illuminate. The green link LED on the

Ethernet Smart Cable RJ-45 connector illuminates, as shown in Figure 1, indicating a

live Ethernet connection. The green activity LED on the Ethernet Smart Cable RJ-45

connector flickers, indicating network activity.

Figure 1. Ethernet Smart Cable, Front View and Rear View

DBG Connector

RUN LED

PWR LED

Ethernet Connector

5 VDC Power In

Activity LED

Link LED

1 2 3 4 5 6 7 8 ... 13 14

Sin comentarios

ZiLOG ZENETSC0100ZACG Manual de usuario Pagina 3