Zilog Z51F6412 Manual de usuario descargar pdf (Pagina 23)

UM025901-1112 Configure the Z8051 OCD and Z51F6412 Development

Z51F6412 Development Kit

User Manual

Configure the Z8051 OCD and Z51F6412

Development Board

Observe the following procedure to set up and configure the Z8051 On-Chip Debugger

and the Z51F6412 Board.

Steps number 1 to 4 present the power-up sequence. Carefully follow these steps to avoid

encountering an improper connection or disconnection.

1. Connect the Z8051 On-Chip Debugger (OCD) to the host PC’s USB port.

2. Connect one end of the 10-circuit cable to the Z8051 OCD.

3. Connect the other end of the 10-circuit cable connector to the Board’s J3 connector.

Pin 1 of the cable connector is indicated by a red stripe, as shown in Figure 13.

Figure 13. Connecting the 10-Circuit Cable to the Board

Caution:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 53 54

Sin comentarios

Zilog Z51F6412 Manual de usuario Pagina 23