Zilog S3F8S19 Manual de usuario descargar pdf (Pagina 30)

UM026801-0914 Run the S3F8S19 Monitor Demo

S3F8S19 Development Kit

User Manual

Appendix D. Run the S3F8S19 Monitor Demo

Observe the following procedure to run the S3F8S19 Monitor Demo sample project.

1. If you are using Tera Term as your console program, set it to 57600-8-N-1.

Alternatively, you can use another program such as HyperTerminal or RealTerm.

If you use Tera Term, the recommended version is 4.83.

2. Set the appropriate COM port by looking at the Device Manager and checking the

COM port that the USB Serial Port is assigned to. In this example, the USB Serial Port

is assigned to COM5, as indicated in Figure 29.

3. Launch ZDS II by navigating from the Windows Start menu to

Programs → Zilog

ZDS II–S3<Version>

→ ZDS II–S3<Version>.

4. From the File menu in ZDS II, select

Open Project, and navigate to the following

filepath:

<ZDS Install>\samples\S3F8S19\Mon_Demo

5. Select the S3F8S19_Mon_Demo.zdsproj project from within the Mon_Demo

folder, as shown in Figure 30, and click

Open. A list of source files will appear in the

Workspace panel.

Figure 29. Set the COMx

Note:

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Sin comentarios

Zilog S3F8S19 Manual de usuario Pagina 30