Zilog ZUSBOPTS Manual de usuario descargar pdf (Pagina 27)

UM025503-0814 The Zilog Educational Platform as a Development Board

Zilog Educational Platform

User Manual

11. From the File menu in ZDS II, select Open Project... to open the Open Project dialog.

In this dialog, browse to the

C_Projects folder on the USB Flash drive, and open the

LightMeUp.c project file.

12. With the

LightMeUp.c project displayed on your PC’s monitor, compile it by click-

ing

Build in the ZDS II taskbar.

13. From the selection of commands listed in the

Build drop-down menu, select Rebuild

All

. The compile process that ensues will create several files that will be placed in the

Debug folder, which is located in the Project directory. One of these files will display

.hex extension; this file will be used to burn the program into Flash memory in a

procedure that will follow later.

14. When the rebuild is complete, a

Build Complete message will appear in the Mes-

sage Window at the bottom of the ZDS II screen; see Figure 14.

15. In the ZDS II taskbar, click

Debug to open the Debug Command Window.

16. In the Debug Command Window, select

Connect to Target, and observe the progress

of the debug operation in the progress window. When the debug is complete, a

Suc-

cessfully initialized target

message will appear, as shown in Figure 15.

Figure 14. Build Completed Message

Figure 15. Connected Successfully Screen

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 37 38

Sin comentarios

Zilog ZUSBOPTS Manual de usuario Pagina 27