Zilog ZUSBOPTS Manual de usuario descargar pdf (Pagina 45)

UM025603-0814 Establish A WiFi Connection

Zilog Educational Shields

User Manual

The following commands are case-sensitive.

a. set wlan join 4

b. set wlan ssid CLIENT

c. set wlan chan 0

d. set wlan auth 6

e. set ip address 169.254.1.1

f. set ip netmask 255.255.0.0

g. set ip dhcp 0

h. set ip proto 3

i. set ip localport 2000

6. Enter save, the press the Enter key. Next, enter reboot, then press Ctrl-D to exit

the RN-171 module’s command mode and return to the Platform’s root shell, which is

indicated by the

ZEdulab> prompt.

7. At the Module 2 prompt, enter the following sequence of commands, each command

followed by the Enter key, to configure the HOST.

a. set wlan join 4

b. set wlan ssid HOST

c. set wlan chan 1

d. set wlan auth 6

e. set ip address 169.254.1.2

f. set ip netmask 255.255.0.0

g. set ip dhcp 0

h. set ip proto 3

i. set ip localport 80

8. Enter save, then press the Enter key. Next, enter reboot, then press Ctrl-D to exit

the RN-171 module’s command mode and return to the Platform’s root shell.

9. To establish the WiFi link between the two ZED WLAN shields first requires a scan to

ensure that the CLIENT shield can detect the HOST shield. Enter the

wcmd command

on both console terminals, then enter the

scan command on MODULE 1 (i.e., the

CLIENT). A brief delay may occur as the module scans for available networks. When

the list of networks is returned, press Enter to return to the

<2.32> prompt.

10. If the host appears in the list, enter the

join HOST command on the CLIENT console,

and press Enter.

The following message should appear on the MODULE 1 console:

Listen on 2000

The following message should appear on the MODULE 2 console:

Note:

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 58 59

Comentarios a estos manuales

Sin comentarios

Zilog ZUSBOPTS Manual de usuario Pagina 45

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Zilog ZUSBOPTS