Zilog Z8F1681 Manual de usuario descargar pdf (Pagina 49)

UM026301-1013 Tera Term Configuration

Z8 Encore! XP

F6482 Series Development Kit

User Manual

Appendix C. Tera Term Configuration

If you are using Tera Term as your console program, observe the following procedure to

properly configure it.

1. Connect the RS-232 to 6-pin circuit adapter to Jumper J20 on the F6482 Development

Board. At P1, connect the serial cable or USB-to-serial adapter, then connect the other

end to your PC.

2. In Tera Term, and if your PC has a serial interface, navigate via the

Setup menu to

Serial port… to select the COM port assigned to your serial port. If you do not have a

serial port on your PC, use a USB-to-serial adapter (not included in the kit).

3. Use the Ports (COM & LPT) listing in the Device Manager to determine the correct

COM port assigned to your adapter. Configure this port to reflect the following set-

tings:

– 57600 bps

– 8 data bits

– No parity

– 1 stop bit

– No flow control

4. Click the

OK button to connect to the F6482 Development Board. Upon connection,

you should be able to see the demonstration program menu shown in Figure 11

page 12.

1 2 ... 44 45 46 47 48 49 50

Sin comentarios

Zilog Z8F1681 Manual de usuario Pagina 49