Zilog ZMOT0BHH Manual de usuario descargar pdf (Pagina 13)

UM023902-1013 9

ZMOTION

20-Pin Detection and Control Development Kit

User Manual

Attaching the PIR Sensor Lens

Each of the clip-on lenses slide atop the PIR sensor, and the notch on the PIR sensor aligns

with the notch in the base of the lens, as shown in Figure 3.

Attaching the Circuit Board Lens

This clip-in lens style clips directly into the circuit board over the top of the PIR sensor.

There are 4 mounting clips on the lens that are aligned with the slots in the circuit board.

Note the locating tab on the side of the lens is to be aligned with the silkscreened tab, as

indicated in Figure 4.

Figure 3. NCL-9(26) Lens and PIR Sensor Installed on the

ZMOTION 20-Pin Development Board

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Sin comentarios

Zilog ZMOT0BHH Manual de usuario Pagina 13