Zilog ZMOT0BHH Manual de usuario descargar pdf (Pagina 19)

UM023902-1013 15

ZMOTION

20-Pin Detection and Control Development Kit

User Manual

4. Use the provided ⅜" machine screws (4) with a nut to secure the lens holder in place;

see the example in Figure 6

on page 12.

Connecting the USB SmartCable

Observe the following steps to connect the USB SmartCable to the ZMOTION 20-Pin

Development Board.

The power to the development board must be disconnected or turned OFF before con-

necting or disconnecting the USB SmartCable.

1. Attach one end of the six-conductor ribbon cable (included) to the USB SmartCable

six-pin DBG connector, as shown in Figure 11.

Figure 10. Assembled Flat 0.9" Lens Holder and Flat Lens

Figure 11. Connecting the Six-Conductor Ribbon Cable to the USB SmartCable

Caution:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 33 34

Sin comentarios

Zilog ZMOT0BHH Manual de usuario Pagina 19