Zilog ZMOT0BHH Manual de usuario Pagina 25
- Pagina / 34
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
UM023902-1013 21
ZMOTION
®
20-Pin Detection and Control Development Kit
User Manual
8) Hypersense Mode/Level. There are three settings that control sensitivity to motion
during Hypersense; these settings are Major Sensitivity, Minor Sensitivity and Range. This
menu option allows you to enable and set each of these settings individually.
9) Normal Sense Level. When in normal motion sense mode (i.e., not in Hypersense
mode), this selection allows you to set the sensitivity levels of the three settings (Major
Sensitivity, Minor Sensitivity and Range).
Making Changes to the ZMOTION_Serial_Config Project
The operation of the motion detection software can be changed by making modifications
directly to the source code. Follow the comments in the code (generally in
main.h and
main.c) to make any permanent changes. For example, to change the lens configuration
file and the duration of the LED ON time, observe the following procedure.
1. Change the following line in the
main.h file:
#define DEF_LED_ON_TIME DELAY_500MSEC //Time the LED
//stays on
//when motion
//is detected
2. Change the line as follows to select a five-second LED ON time:
#define DEF_LED_ON_TIME DELAY_5SEC //Time the LED
//stays on when
//motion is
//detected
LED ON time definitions are provided in the main.h file for values from 50 ms to 30 min-
utes.
3. Click the
Rebuild icon to build the project. The build output should not indicate any
errors. Click the
Go icon to download the modified project and start the application
running. Generate motion and notice that the LED now stays on for 5 seconds.
// This file must match the lens and PIR sensor used in the application
//#include "API_INIT_00.h" // Generic settings: non-lens-specific
//#include "API_INIT_01.h" // API configuration file for AA 0.9 GI V1 Lens
//#include "API_INIT_02.h" // API configuration file for CM 0.77 GI V3 Lens
//#include "API_INIT_03.h" // API configuration file for CM 0.77 GI V5 Lens
#include "API_INIT_04.h" // API configuration file for CWM 0.5 GI V1 Lens
//#include "API_INIT_05.h" // API configuration file for NCL-9(26) Lens
//#include "API_INIT_06.h" // API configuration file for NCL-10IL Lens
//#include "API_INIT_07.h" // API configuration file for NCL-3B Lens
//#include "API_INIT_08.h" // API configuration file for NCL-3R Lens
//#include "API_INIT_09.h" // API configuration file for NCL-10S Lens
//#include "API_INIT_0A.h" // API configuration file for NCL-11 Lens
//#include "API_INIT_IML-0643.h+" // API configuration file for IML-0643 Lens
Note:
- 20-Pin Detection 1
- UM023902-1013 ii 2
- Revision History 3
- Table of Contents 4
- Introduction 5
- Supported Operating Systems 6
- Safeguards 7
- Documentation 7
- UM023902-1013 4 8
- Lighting Documentation 8
- Development Board 10
- Pyroelectric Sensor Options 11
- Lens Mounting Options 12
- Attaching the PIR Sensor Lens 13
- User Manual 14
- UM023902-1013 11 15
- See Figure 7 16
- UM023902-1013 14 18
- Connecting the USB SmartCable 19
- Running the Sample Project 20
- The Rebuild All icon 21
- The Reset icon The Go icon 22
- ZMOTION_Serial_Config 23
- SmartCable Driver 27
- Windows Vista 32/64 Systems 28
- Windows XP Systems 28
- UM023902-1013 25 29
- UART Driver 30
- Customer Support 34
Relacionado con productos y manuales para Sensores Zilog ZMOT0BHH
Sensores Zilog Z16FMC2 Manual de usuario
(8 paginas)
(8 paginas)
Sensores Zilog Z16FMC2 Manual de usuario
(26 paginas)
(26 paginas)
Sensores Zilog ZAURA868 Manual de usuario
(44 paginas)
(44 paginas)
Sensores Zilog Z80230 Manual de usuario
(394 paginas)
(394 paginas)
Sensores Zilog ZAURCT Manual de usuario
(59 paginas)
(59 paginas)
Acer X233Hbd Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Fernseher & Monitore Acer X233Hbd.
Wir stellen 1 PDF-Handbücher Acer X233Hbd zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Betriebsanleitung
Comentarios a estos manuales