Zilog EZ80F91 Manual de usuario descargar pdf (Pagina 8)

eZ80F91 Development Kit

User Manual

UM014220-0508 Introduction

05/30/06—The following components are not populated on the board:

– U11: Triac, SCR Phone Line D0-214

– U26 and U27: IC RS485, XCVR, Low PWR, 8-SOIC

– C3 and C4: CAP 1000 pF Ceramic Disc 1 KV

– D1 and D3: Diode LED Amber 0805 SMT

– T1: Inductor Ferrite Bead, 2x15 Turns

– J1: Conn HDR/Pin 1x32 2 mm socket

– J5: Conn HDR/Pin 1x2 2 mm socket

– J9: Conn HDR/Pin 1x9 2 mm socket

– P4: Conn RJ14 Jack 6-Pos 4-CKT

– P5: Conn 9-CKT Cir rt-angl PC Mount

eZ80F91 Development Kit Overview

The purpose of the eZ80F91 Development Kit is to provide a set of tools

for evaluating the features of the eZ80F91 microcontroller and to be able

to develop a new application before building application hardware.

The eZ80Acclaim!

Development Kit is designed to accept a number of

application-specific modules and eZ80Acclaim!-based add-on modules,

including the eZ80F91 Module featured in this kit.

The eZ80Acclaim! Development Kit, together with its plugged-in

eZ80F91 Module, can operate in stand-alone mode with Flash memory, or

interface via the ZPAK II Debug Tool or USB Smart Cable

(ZUSBSC0100ZACG) to a host PC running Zilog Developer Studio II

Integrated Development Environment (ZDS II IDE) software.

The address bus, data bus, and all eZ80F91 Module control signals are

buffered on the eZ80Acclaim! Development Kit to provide sufficient

drive capability.

A block diagram of the eZ80Acclaim! Development Kit and the eZ80F91

Module is shown in Figure 1.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 77 78

Sin comentarios

Zilog EZ80F91 Manual de usuario Pagina 8