Zilog Z80380 Manual de usuario Pagina 124
- Pagina / 268
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
5-90
Z380
™
USER'S MANUAL
DC-8297-03
ZILOG
LD
LOAD FROM I OR R REGISTER (BYTE)
LD dst,src dst = A
src = I, R
Operation: dst ← src
The contents of the source are loaded into the accumulator. The contents of the source are
not affected. The Sign and Zero flags are set according to the value of the data transferred;
the Overflow flag is set according to the state of the interrupt enable. Note that if an interrupt
occurs during execution of either of these instructions the Overflow flag reflects the prior
state of the interrupt enable. Also note that the R register does not contain the refresh
address and is not modified by refresh transactions.
Flags: S: Set if the data loaded into the accumulator is negative; cleared otherwise
Z: Set if the data loaded into the accumulator is zero; cleared otherwise
H: Cleared
V: Set when loading the accumulator if interrupts are enabled; cleared otherwise
N: Cleared
C: Unaffected
Addressing Execute
Mode Syntax Instruction Format Time Note
LD A,I 11101101 01010111 2
LD A,R 11101101 01011111 2
- Z80380 CPU 1
- 'S MANUAL 1
- CHAPTER 1 3
- 1.1 INTRODUCTION (Continued) 4
- 1.2 CPU ARCHITECTURE 5
- 1.2.1 Modes of Operation 5
- 1.2.2 Address Spaces 5
- 1.2.3 Data Types 6
- 1.2.4. Addressing Modes 6
- 1.2.5. Instruction Set 6
- 1.2.6 Exception Conditions 6
- 1.3.1 High Throughput 7
- (Continued) 8
- 1.4 SUMMARY 8
- SER'S MANUAL 10
- 2.4 MEMORY ADDRESS SPACE 12
- USER'S MANUAL 15
- DC-8297-03 15
- CHAPTER 2 16
- CHAPTER 3 23
- 3.2 DECODER DIRECTIVES 24
- CHAPTER 4 26
- 4.2.3 Indirect Register (IR) 27
- 4.2.4 Direct Address (DA) 28
- 4.2.5 Indexed (X) 29
- 4.3 DATA TYPES 34
- CHAPTER 5 35
- 5.2.7 Condition Codes 37
- SWAP, and PUSH/POP Group 41
- 5.5.8 Program Control Group 46
- 5.5.11 CPU Control Group 50
- 5.5.12 Decoder Directives 51
- 5.7 EXECUTION TIME 52
- ADD WITH CARRY (BYTE) 54
- ADD WITH CARRY (WORD) 55
- ADD (BYTE) 57
- ADD (WORD) 58
- ADD TO STACK POINTER (WORD) 59
- AND (BYTE) 61
- AND (WORD) 62
- BIT TEST 63
- BANK TEST 64
- CALL RELATIVE 66
- COMPLEMENT CARRY FLAG 67
- COMPARE (BYTE) 68
- COMPARE (WORD) 69
- COMPARE AND DECREMENT (BYTE) 70
- COMPARE AND INCREMENT (BYTE) 72
- COMPLEMENT ACCUMULATOR 74
- COMPLEMENT HL REGISTER (WORD) 75
- DECIMAL ADJUST ACCUMULATOR 76
- DECODER DIRECTIVE 77
- DECREMENT (BYTE) 78
- DECREMENT (WORD) 79
- DISABLE INTERRUPTS 80
- DIVIDE UNSIGNED (WORD) 81
- ENABLE INTERRUPTS 83
- EXCHANGE REGISTER (WORD) 86
- EXCHANGE WITH ACCUMULATOR 89
- EXTEND SIGN (BYTE) 91
- EXTEND SIGN (WORD) 92
- INTERRUPT MODE SELECT 97
- INPUT (BYTE) 98
- INPUT (WORD) 99
- INPUT ACCUMULATOR 100
- INPUT (FROM PAGE 0) 101
- INCREMENT (BYTE) 104
- INCREMENT (WORD) 105
- INPUT AND DECREMENT (BYTE) 106
- INPUT AND DECREMENT (WORD) 107
- INPUT AND INCREMENT (BYTE) 110
- INPUT AND INCREMENT (WORD) 111
- JUMP RELATIVE 115
- LOAD ACCUMULATOR 116
- LOAD IMMEDIATE (BYTE) 117
- LOAD IMMEDIATE (WORD) 118
- LOAD REGISTER (BYTE) 120
- LOAD REGISTER (WORD) 121
- LOAD STACK POINTER 123
- LOAD I REGISTER (WORD) 126
- LOAD CONTROL REGISTER (BYTE) 127
- LOAD AND DECREMENT (BYTE) 130
- LOAD AND DECREMENT (WORD) 131
- LOAD AND INCREMENT (BYTE) 134
- LOAD AND INCREMENT (WORD) 135
- MULTIPLY UNSIGNED (BYTE) 138
- MODE TEST 139
- MULTIPLY (WORD) 140
- MULTIPLY UNSIGNED (WORD) 141
- NEGATE ACCUMULATOR 142
- NEGATE HL REGISTER (WORD) 143
- NO OPERATION 144
- OR (BYTE) 145
- OR (WORD) 146
- OUTPUT DECREMENT MEMORY 147
- OUTPUT INCREMENT MEMORY 151
- OUTPUT (BYTE) 155
- OUTPUT (WORD) 156
- OUTPUT ACCUMULATOR 157
- OUTPUT (TO PAGE 0) 158
- OUTPUT AND DECREMENT (BYTE) 161
- OUTPUT AND DECREMENT (WORD) 162
- OUTPUT AND INCREMENT (BYTE) 163
- OUTPUT AND INCREMENT (WORD) 164
- POP ACCUMULATOR 165
- POP CONTROL REGISTER 166
- POP REGISTER 167
- PUSH ACCUMULATOR 168
- PUSH CONTROL REGISTER 169
- PUSH IMMEDIATE 170
- PUSH REGISTER 171
- RESET BIT 172
- RESET CONTROL BIT 173
- RETURN FROM BREAKPOINT 175
- RETURN FROM INTERRUPT 176
- ROTATE LEFT (BYTE) 178
- ROTATE LEFT (WORD) 179
- ROTATE LEFT (ACCUMULATOR) 180
- ROTATE LEFT CIRCULAR (BYTE) 181
- ROTATE LEFT CIRCULAR (WORD) 182
- ROTATE LEFT DIGIT 184
- ROTATE RIGHT (BYTE) 185
- ROTATE RIGHT (WORD) 186
- ROTATE RIGHT (ACCUMULATOR) 187
- ROTATE RIGHT CIRCULAR (BYTE) 188
- ROTATE RIGHT CIRCULAR (WORD) 189
- ROTATE RIGHT DIGIT 191
- SUBTRACT WITH CARRY (BYTE) 193
- SUBTRACT WITH CARRY (WORD) 194
- SET CARRY FLAG 196
- SET CONTROL BIT 198
- SHIFT LEFT ARITHMETIC (BYTE) 199
- SHIFT LEFT ARITHMETIC (WORD) 200
- SHIFT RIGHT ARITHMETIC (BYTE) 202
- SHIFT RIGHT ARITHMETIC (WORD) 203
- SHIFT RIGHT LOGICAL (BYTE) 204
- SHIFT RIGHT LOGICAL (WORD) 205
- SUBTRACT (BYTE) 206
- SUBTRACT (WORD) 207
- TEST (BYTE) 211
- TEST I/O PORT 212
- EXCLUSIVE OR (BYTE) 213
- EXCLUSIVE OR (WORD) 214
- CHAPTER 6 215
- 6.2 INTERRUPTS (Continued) 216
- 6.2.2 Interrupt Control 216
- 6.3 TRAP INTERRUPT 218
- 6.7 RETI INSTRUCTION 220
- CHAPTER 7 222
- APPENDIX A 225
- APPENDIX B 228
- APPENDIX C 243
- APPENDIX D 258
- APPENDIX E 262
Relacionado con productos y manuales para Sensores Zilog Z80380
Sensores Zilog Z80380 Manual de usuario
(116 paginas)
(116 paginas)
Sensores Zilog Z80195 Manual de usuario
(47 paginas)
(47 paginas)
Sensores Zilog Z80180 Manual de usuario
(326 paginas)
(326 paginas)
Sensores Zilog Z86193 Manual de usuario
(260 paginas)
(260 paginas)
Sensores Zilog Z86C36 Manual de usuario
(64 paginas)
(64 paginas)
Sensores Zilog Z86E07 Manual de usuario
(43 paginas)
(43 paginas)
Sensores Zilog Z08470 Manual de usuario
(326 paginas)
(326 paginas)
Sensores Zilog Z08470 Manual de usuario
(330 paginas)
(330 paginas)
Sensores Zilog Z8PE002 Manual de usuario
(48 paginas)
(48 paginas)
Sensores Zilog Z8PE002 Manual de usuario
(44 paginas)
(44 paginas)
Sensores Zilog Z8FS021A Manual de usuario
(25 paginas)
(25 paginas)
Sensores Zilog ZEPIR0BA Manual de usuario
(18 paginas)
(18 paginas)
Sensores Zilog EZ80F91GA Manual de usuario
(127 paginas)
(127 paginas)
Sensores Zilog ZMOT0BHH Manual de usuario
(34 paginas)
(34 paginas)
Sensores Zilog Z16FMC2 Manual de usuario
(8 paginas)
(8 paginas)
Sensores Zilog Z16FMC2 Manual de usuario
(26 paginas)
(26 paginas)
Sensores Zilog ZAURA868 Manual de usuario
(44 paginas)
(44 paginas)
Sensores Zilog Z80230 Manual de usuario
(394 paginas)
(394 paginas)
Sensores Zilog ZAURCT Manual de usuario
(59 paginas)
(59 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.037 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales